News

The Netherlands has emerged as a leader in solar energy, ranking first in the EU for solar capacity per capita, surpassing Germany, Denmark, and Belgium. With an impressive increase of 28% from 2021, the country now boasts over 1,386 watts per person and nearly 24.4 gigawatts of total installed capacity. In 2022 alone, solar power generation surged by 46%, contributing to a rise in its share of total energy consumption from 2.1% to 3.3%.     This growth is primarily driven by businesses, which account for nearly 60% of solar energy usage. However, the rapid expansion has raised concerns about grid capacity and congestion, with operators facing challenges in upgrading infrastructure to accommodate future demand. The Dutch government aims for 70% of electricity to come from renewable sources by 2030 and is investing heavily in this transition, allocating €13 billion in 2022 and €8 billion in 2023 for renewable energy projects.     In addition to public investments, private citizens are encouraged to participate in the energy transition through platforms like ZonnepanelenDelen and DuurzaamInvesteren, which allow for investments in solar panel installations and energy storage solutions. As the Netherlands continues to innovate in renewable energy, the collaboration between industry and government will be crucial to overcoming upcoming challenges.

In the pursuit of the dream of a zero-carbon society, Axiomtek has always stood out for its innovative power and sense of mission. As a brand dedicated to photovoltaic efficiency and quality aesthetics, they not only continue to push the boundaries of technology, but also make continuous efforts in customer relations to meet user needs. Let's take a deeper look at Axiomtek's core value of one-stop system solution and the outstanding benefits it brings. The efficiency of AIKO's one-stop system solution is obvious. With a conversion efficiency of over 24 per cent, its ABC modules convert solar energy into electricity more efficiently than conventional technologies. This means that the ABC modules can continue to generate electricity in the morning and evening when the light is weak, providing a more stable power supply for users. Even more impressively, Axiomtek employs one string tracking technology to maximise the energy captured from each module, further improving power generation efficiency. This high efficiency is crucial to achieving the goal of a zero-carbon society, as it helps to maximise the use of solar resources. The system's easy-to-install and easy-to-operate features provide users with unrivalled convenience. The one-string-one-monitoring technology allows users to monitor the working status of each string in real time, realising refined operation and maintenance. The system bracket design is flexible and can be adapted to a variety of installation directions, providing more flexible options. In addition, the integrated design of household storage makes the installation process faster and more convenient, while the modular design features make the flexible expansion of the system possible. These features greatly reduce the difficulty of installation and maintenance, providing users with comprehensive support. One of the advantages of AIKO's one-stop system solution is the convenience of kitting. Users can enjoy the one-stop package delivery without long waiting time. The Kit-style racking package makes the installation process more hassle-free and less labour-intensive. This means that users can start using the solar power system more quickly, contributing to a zero-carbon society.   Last but not least, Axiomtek provides users with system-level OEM service. Whether it's modules, racking, inverters, storage or APP, users can enjoy a full range of service guarantees to ensure efficient system operation and reliability. This quality of service is a source of pride for the AIKO brand and a key factor in their partnership with customers.  

With the gentle breeze of summer, we are about to usher in the annual Dragon Boat Festival. In this festival full of traditional colours and warm atmosphere, our company sends the most sincere holiday blessings and heartfelt thanks to our customers who have always given us trust and support! Dragon Boat Festival, also known as Dragon Boat Festival, is a traditional festival with a long history of the Chinese nation. It is not only a festival, but also a cultural heritage and emotional exchange. On this special day, we hope that through the dumplings to convey a strong blessing, may your life as this sweet-smelling dumplings, full of sweetness and warmth.   All along, your trust and support are the driving force for us to move forward. It is with your company that we can move forward steadily in the highly competitive market and achieve one achievement after another. Here, we sincerely thank you for your trust and love, but also promise that we will continue to work hard to provide you with better quality products and more intimate service.   In the future, we will continue to uphold the concept of "customer first", and constantly optimise our products and services to meet your growing needs. We firmly believe that only by truly understanding and satisfying the needs of our customers can we win their trust and loyalty.   Last but not least, once again, we wish you a happy Dragon Boat Festival, good health and happiness for your family! May you spend quality time with your family and enjoy the joy and warmth of the festival. At the same time, we also look forward to the future, we can continue to work together to create a better tomorrow!

Yesterday, all the employees of Solarasia held a Year End Party. During the party, the venue was decorated with balloons, creating a warm atmosphere. The event began with a year-end summary speech by Nick Yao, the General Manager of Solarasia. Following that, Nick Yao presented awards for the selection of the Employee of the Year.     Finally, everyone participated in a lucky draw game, with prizes including laptops, power blenders, and cash envelopes. The annual meeting was filled with laughter and joy.        

On January 18, data from the Ningxia Power Trading Centre showed that as of 0:00 that day, Ningxia's cumulative outgoing power reached 700.2 billion kWh, breaking the 700 billion kWh mark in one fell swoop, equivalent to the in situ conversion of 280 million tonnes of standard coal, reducing emissions by 700 million tonnes of carbon dioxide, 190 million tonnes of carbon dust, 10.5 million tonnes of nitrogen oxides, highlighting Ningxia's energy transition to low carbon, helping energy green low-carbon and efficient use of energy, highlighting the practical achievements of Ningxia's low-carbon energy transformation and fuelling the green and efficient use of energy. According to the calculation of 947 kWh of electricity per capita per year for China's residents in 2022 announced by the National Energy Administration, 700 billion kWh of electricity is enough to support the country's 1.4 billion population for 192 days. Ningxia, as an important sending end of China's "West-East Electricity Sending" strategy, has rich coal, solar and wind energy resources. 2023, Ningxia actively play the role of inter-provincial power market, scientific scheduling, fine operation and maintenance, increase inter-region and inter-provincial power support, cumulative total organisation of 335 outgoing transactions, the annual outgoing power 877 billion kilowatt-hours, ranked fifth in the State Grid provinces to provide outgoing support for the Hangzhou Asian Games, the Chengdu Universiade. The total number of outgoing transactions organised is 335, and the amount of electricity sent out for the whole year is 87.7 billion kWh, which is ranked fifth among all the provinces in the State Grid network, and it provides outgoing support for the Asian Games in Hangzhou and the Universiade in Chengdu, and helps the national electric power supply guarantee "one board chess".   It is understood that in Ningxia sent 700 billion kilowatt-hours of electricity, new energy power reached 79.5 billion kilowatt-hours, accounting for 11.4 per cent of the total amount of electricity sent to the "14th Five-Year Plan" end of the Ningxia-Hunan power transmission corridor is completed, this ratio will be significantly increased. Ningxia in all efforts to ensure that the carbon peak carbon and the goal of achieving the process, innovative implementation of the "wind and fire" bundled transmission, new energy power transmission scale growth year by year, achieved by the transmission of "fire" power to the transmission of "green" power transformation, to put the "fire" power to the "green" power. The transformation of electricity from "fire" transmission to "green" transmission has been achieved by sending clean energy from Ningxia to the whole country, contributing to the construction of a new type of energy system and the promotion of high-quality development of energy with the wisdom of Ningxia and the Ningxia programme. It is particularly worth mentioning that in 2023, the State Grid Ningxia Electric Power Co., Ltd. flexibly carry out energy for capacity, flexible trading, new fire bundling and other transactions to promote the new energy transmission and consumption of 13.7 billion kilowatt-hours, improve the new energy transmission ratio of 35 per cent, reduce the new energy abandonment rate of 2.5 percentage points, to ensure that the new energy power annual utilisation rate to remain at more than 97 per cent.   Ningxia in-depth implementation of the national energy strategy, relying on the national unified power market, has built and put into operation Ningxia to Shandong, Ningxia to Zhejiang, two power transmission "artery", and in the construction of the third Ningxia to Hunan power transmission channel, in order to ensure the reliable supply of electricity in Ningxia, at the same time, will be the power through the DC transmission channels continue to be sent out! Sent out, power trading also by the initial Shandong, Zhejiang extended to the current Shanghai, Chongqing, Hubei and other provinces, to protect the power needs of North China, East China has played a positive role, but also to achieve a high quality of the new energy in Ningxia in the local consumption and the optimal allocation of a wide range of power, and vigorously promote the transformation of the resource advantages of Ningxia to economic advantages, creating various types of economic benefits of more than 160 billion yuan for the local Ningxia, increasing employment of more than 60,000 jobs. More than 60,000 jobs have been created.   In order to do a good job in the lean operation and maintenance of the existing two DC transmission channels and improve the efficiency of power grid utilization, State Grid Ningxia Power Co., Ltd. has set up a science and technology innovation centre and a DC innovation studio to make scientific and technological innovation a source of motivation to promote the high-quality operation and inspection of the DC system, and has independently researched and developed a variety of intelligent robots, drone carriers, a full set of anti-falling foot pegs, rope devices, drone nests, and related intelligent platform software systems, and continues to promote the transformation of scientific and technological achievements projects into applications on the ground. Promote the transformation of scientific and technological achievements project landing application, through the transformation of scientific and technological achievements "last kilometre", and further promote the management of lean and control intelligent. Continuously promote the transformation and upgrading of power-carrying operation technology and equipment, applying helicopters, "drone +" mode, "small flyer" rope-type electric lifting device, electric wire walking device and other new technologies and new equipment to carry out power-carrying operations, digitally empowered power-carrying operations to run out of "acceleration". "Acceleration", and constantly improve the equipment defects, hidden danger of the discovery rate, promote operation and maintenance mode to the "machine instead of man" change, go all out to guard the DC channel "zero tripping" target.     At present, the energy availability and operation efficiency of the two DC channels in Ningxia are among the top in the country, and since the commissioning of the Ningdong-Shandong project, the annual energy utilisation hours have been maintained above 6,000 hours, and the average energy utilisation rate of the project has exceeded 80% for nine consecutive years, which is ranked first in the country. The annual energy utilisation hours of Lingzhou-Shaoxing project have been kept above 6,000 hours since 2017, and the full-power operation during the peak summer and winter this year has reached a record high, which has strongly supported the safe and stable use of electricity in the East China region, and has played the role of a "Great Power Heavy Instrument" in guaranteeing the safe and stable supply of energy in the whole country.     Nowadays, the power transmission channel from Ningxia to Hunan is under construction in full swing. As the country's first to develop the Ningxia desert photovoltaic base, delivery of new energy-based ultra-high voltage transmission channel, will bring the third major development opportunities for the Ningxia power grid. When Ningxia third "air highway" completed, Ningxia is expected to send 40 billion kilowatt-hours of new power, will fundamentally solve the problem of new energy grid consumption in Ningxia, help Ningxia to promote the full range of green, reduce coal, carbon reduction, to break out of a road of energy transformation. The project is expected to save 6 million tonnes of standard coal consumption each year, emission reduction of 16 million tonnes of carbon dioxide, the annual transmission of direct revenue of more than 4 billion yuan, while pulling the Ningxia power investment of more than 100 billion yuan, not only for the energy transition in Ningxia to contribute to the power grid, but also for the country to promote a fundamental change in the way the use of energy, to achieve energy security and green low-carbon development of the first pilot contribute to the power of Ningxia.

With the increasing sophistication of renewable energy technologies, photovoltaic (PV) power systems have become the green energy solution of choice for many homes and businesses. In this system, photovoltaic panels play a key role in converting solar energy into electricity, while the battery is an important component in storing this electricity for emergencies. So how do PV panels charge the batteries? This paper explores in detail the working principle, practical applications and optimisation strategies of this process.   First, the basic principle of photovoltaic panels to charge the battery   Photovoltaic panels, also known as solar panels, are made up of multiple solar cells. When sunlight hits the photovoltaic panel, photons hit the silicon atoms in the cell sheet, causing them to release electrons. These free electrons form an electric current, known as a photovoltaic current, inside the cell sheet. The photovoltaic panel draws this current through the positive and negative electrodes, supplying it to external circuits. A battery, on the other hand, is a device capable of storing electrical energy, which is converted into chemical energy and stored through an internal chemical reaction. When electricity is needed, the battery converts the chemical energy into electrical energy and releases it through a reverse reaction.   In a photovoltaic power generation system, the photovoltaic panel is connected to the battery through a controller. The role of the controller is to regulate the output voltage and current of the photovoltaic panel to match the charging requirements of the battery. When the sun is sufficient, the current generated by the PV panel is regulated by the controller to charge the battery. When the battery is fully charged, the controller automatically cuts off the charging circuit to prevent overcharging from damaging the battery.   Second, Precautions in practical application Matching problem: When choosing PV panels and batteries, make sure that their parameters such as voltage, current and capacity are matched. If the output voltage of the PV panel is too high or too low, it may affect the charging effect and life of the battery. Installation environment: The installation location of PV panels should try to choose a sunny and unobstructed place to improve the photoelectric conversion efficiency. At the same time, also pay attention to the tilt angle and orientation of the PV panel, these factors will affect its power generation effect.   Controller selection: the controller in the photovoltaic power generation system plays a key role, to choose the quality of reliable, functional controller. Some advanced controllers also have anti-reverse charge, anti-overcharge, anti-over-discharge and other protection functions, can better protect the battery.   Optimisation Strategies and Recommendations Regular inspection and maintenance: in order to ensure the normal operation of the PV power generation system, the working status of components such as PV panels, batteries and controllers should be checked regularly. If any abnormality is found, they should be repaired or replaced in time. Intelligent charging management: With the development of IoT technology, some advanced charging management systems are able to realise remote monitoring and intelligent charging. These systems can automatically adjust the output of PV panels and the charging strategy of batteries according to real-time weather, electricity demand and other factors to improve energy utilisation efficiency.   Diversified energy supply: Where conditions permit, consideration can be given to combining photovoltaic power generation systems with other renewable energy technologies (e.g., wind, water, etc.) to form a diversified energy supply system. This will not only improve the stability of energy supply, but also reduce the risk of dependence on a single energy source. In conclusion, the process of charging batteries with PV panels involves the collaborative work of multiple links and components. To ensure the smooth running of this process, it requires in-depth exploration and continuous improvement at multiple levels, including principle, practice and optimisation. With the continuous progress and innovation of science and technology, it is believed that photovoltaic power generation systems will create a greener and more sustainable energy future for mankind in the future.    

To mitigate the possible impact of the El Niño phenomenon on summer-season power and to reduce the dependence of households on the grid for electricity, the Philippine Energy Regulatory Commission (ERC) is encouraging the public to use solar home systems. The ERC noted that the licensing process for the installation of solar panels on homes has been simplified. In addition, the authority has partnered with various local governments to set up a one-stop office to facilitate applicants in obtaining permits for the installation of solar home systems. The agency noted, "Applicants who want to obtain a licence no longer need to travel to the Energy Regulatory Commission's head office; they can go directly to the one-stop office of the local government and quickly go through the licence process." Meanwhile, the authority will also work with the state-owned LandBank to provide assistance in funding for households interested in installing residential solar power, as well as develop projects to assist cooperatives in solving any energy problems that may arise during the dry season.  Earlier, the Philippine Department of Science and Technology (DOST) said the country will feel the strong effects of El Niño in the first or second quarter of 2024. It noted that 65 provinces in the country will face drought by the end of May. President Marcos has previously stressed the importance of having a steady supply of water and electricity during El Niño.

The latest report released by the German Federal Union of the Solar Energy Industry (Bundesanstalt für Sozialwirtschaft) shows that more than one million sets of solar energy systems will be newly installed in Germany in 2023 for power generation or heating, which is a record high. The report points out that Germany currently has about 3.7 million sets of solar energy systems, last year's total power generation was 62 billion kWh, covering 12 per cent of Germany's total electricity consumption.  

Come to a photovoltaic base in Shihezi City, Xinjiang, the surrounding goose feather snow, the temperature fell to minus ten degrees Celsius, but some of the photovoltaic panels on the snow has melted part of it. This is thanks to the double-glass components so that the photovoltaic panels double-sided power generation. According to the base of the relevant person in charge of Wang Runsheng introduction, the sunlight through the snow, land diffuse reflection to the back of the photovoltaic panels, on the one hand, solar energy can be converted into electricity, on the other hand, the heat generated by the power generation process will melt the photovoltaic panels on the front of the snow. "Our base covers an area of more than 30,000 acres . Because of the low efficiency of manual clearing of large areas, the use of double-sided double-glazed photovoltaic panels can reduce snow cover and can effectively improve the efficiency of power generation in snowy days." "If a region's power generation is monitored to be abnormal, the operation and maintenance personnel can patrol the drone and combine it with infrared map analysis in order to locate the faulty PV panels and carry out timely maintenance." Wang Runsheng said, "This approach has a wider field of view and higher accuracy than manual patrols, and less than 10 people can complete the daily inspection and maintenance of the entire base project." Project data show that the photovoltaic base investment totalled 4.8 billion yuan, equipped with a booster station, electrochemical energy storage system, etc. Construction began at the beginning of this year, and nearly all of them are connected to the grid. It is expected to provide around 2.1 billion kilowatt-hours of green power annually, accounting for about 4.5 percent of Shihezi's 2022 power generation, equivalent to an annual saving of about 650,000 tonnes of standard coal. China's Xinjiang has abundant sunshine and solar energy resources. In recent years, Xinjiang to speed up the pace of photovoltaic industry layout, from equipment manufacturing, industrial support and other aspects of force, help solar energy resources into development advantages. As of early December, Xinjiang's new energy scale ranked first in the country.

In recent times, the German government frequently rumours in the field of solar energy to reduce the so-called "dependence on China" sound. Local time on December 17, the German economy minister Habeck (Green Party) accepted the German media "German editorial network" (RND) interview, said he plans to provide state subsidies to strengthen the power of the country's solar energy manufacturers, and compete with Chinese manufacturers.     "German solar products comply with certain criteria that products from other countries do not, for example, German manufacturers often operate efficiently without the use of hazardous chemicals ......," Habeck said, therefore, German manufacturers "should be rewarded for this resilient contribution."     Habeck said he plans to subsidise local solar manufacturers at the national level through Germany's Renewable Energy Act, and that "the current parliamentary proposal for a 'solar package' makes the implementation of state subsidies possible". The RND reports that the "solar package" was originally scheduled to come into force at the beginning of this year, but discussions in the German Bundestag have been postponed until around January next year.     In any case, we have the firm goal of realising the planned projects," says Habeck. We have strong and innovative companies, and other companies that want to invest here are also interested. We should make the most of it." He also called on German manufacturers to actively market their products, for example, by "launching a drive to provide special offers for German products."     Habeck emphasised the importance of the solar sector for job creation, and that "it is important for Germany that domestic products have at least a basic share of the domestic market". It is also a question of economic security, he said, "We cannot rely entirely on imports."       Initially, the German Federal Ministry of Economics planned to use 1.3 billion euros (about 10 billion yuan) to provide subsidies for German manufacturers, and asked the states to provide financing schemes for the local photovoltaic industry. But the German Constitutional Court ruled last month to cut most of the budget of the German government's proposed "Climate and Transition Fund". Now, the Ministry of Economy wants Parliament to adopt a "solar package" to continue to support domestic manufacturers.     Not only Germany, the European Union has recently been planning a similar subsidy programme. Reuters reported in October that in recent years, China's solar panels to European manufacturers brought "enormous price pressure". Germany, led by the European Union countries are trying to reduce dependence on China in the field of solar energy, plans to use subsidies or "tariff peaks" and other tools to protect the European Union photovoltaic enterprises.     Data from the European Commission show that more than 90 per cent of the silicon ingots and wafers used to manufacture solar panels in the European Union come from China. Currently, there is an oversupply and low prices of solar panels in Europe. The European Solar Manufacturing Commission (ESMC) said that prices have fallen from a peak of about 0.24 euros per watt at the beginning of the year to about 0.15 euros, while European manufacturers priced at 0.30 euros.     However, some industry insiders revealed that there are differences within the German enterprises, and some installers questioned the move as trade protection. At the same time, some European solar companies also grouped to express opposition. Swiss photovoltaic executives said that tariffs are not the optimal solution to the current challenges, while the European Photovoltaic Industry Association warned that a potential tariff war would lead to a "lose-lose" situation and seriously undermine Europe's ability to deploy clean energy.

Required Certification! ETN Certification for PV Racking Systems for Rooftop Projects in France After Intersolar 2023 in Munich, Germany, the French ETN certification for PV module racking systems has been on the radar of more and more Chinese racking manufacturers. As of September 2023, although no Chinese racking manufacturer has yet obtained the French ETN certification, more and more Chinese racking manufacturers in the market have started to enquire about or plan for the certification application, planning to enter the French rooftop market. At the same time, most Chinese module manufacturers are also arranging to enter the ETN white list of French racking manufacturers in order to gain entry into the French rooftop and car park PV roofing market.   What is the French ETN certification for racking systems?   ETN (Etude de Technique Nouvelle) - Etude de Technique Nouvelle - is a technical study carried out by the French Control Office and the Centre de Science et Technique de la Construction (CSTC) on the compatibility of the racking system and PV modules, checking the overall system's waterproofing, mechanical resistance, protection against wind, resistance to compression, fire risk, and other key points and feasibility in different geographical areas.   The ETN certification for mounting systems in France is awarded to the manufacturer of the mounting system by a qualified certification body after testing and evaluating the mounting system and its matching components. ETN certified mounting manufacturers can work with different PV module manufacturers to add their modules to the white list of mounting installers, proving the compatibility of the modules and the mounting system.   In terms of necessity, before implementing a French rooftop PV and carport PV installation project, the installer's insurance company usually requires an ETN certification from the racking system manufacturer, as well as verification that the module products used in the project have been entered into the whitelist of that racking manufacturer, in order to validate the safety of the installation system and grant the installer ten years of insurance coverage. Without ETN certification, neither the bracket manufacturer nor the module manufacturer can be on the installer's supplier list. ETN certification is therefore essential for both bracket and component manufacturers entering roofing and carport projects in France.

At the Q3 2023 earnings briefing held this afternoon, DEYE Vice Chairman and General Manager Zhang Dongye said, "The incident in Germany has been properly handled, and this incident only affects the sales of the company's micro-inverter products in Germany in the short term. At present, the company has launched a new generation of micro-inverter products, and the market is recovering gradually. At present, the company's European inverter inventory is small, but the industry inventory is still in the process of selling and it is expected that it will be able to adjust to the normal state within one to two quarters (next year)."  In July this year, DEYE was exposed to the existence of microinverters produced and sold that were inconsistent with certification. DEYE then announced that the company's microinverter products sold to Germany lacked relays due to the deviation in the understanding of the relevant personnel of the company of the differences between the VDE4105 and UL1741 standards, and in consideration of the service life of the products.